High strength: steel shafts carry high wind load and support tall poles and high mast designs.
Why Steel
The Capabilities Of Morelux Pole Factory
Why STEEL Pole?

Steel is the most widely used material for light poles in the world.
Because of its strength and cost advantage, steel light poles are widely applied in roadways, parking lots, industrial areas and sports lighting.
HIGH STRENGTH

Safety

Environmentally Friendly

GALVANIZED CORROSION PROTECTION

STEEL Pole Compair With Other Poles
Advantages
Disadvantages
Steel Pole
-High strength steel shafts carry heavy wind load, suitable for tall poles and high mast lighting
-Lower material cost than aluminium and fibreglass
-Hot-dip galvanized and powder coated for long-term corrosion protection
-Easy to fabricate into tapered, octagonal, conical and custom shaft shapes
-100% recyclable with real scrap value
• About three times heavier than aluminium, so shipping and installation cost more
• Bare steel rusts without protection, so galvanizing and coating are required
Fibreglass Pole
-Lightweight, easy transport and installation
-Corrosion resistant, maintenance free
•No recycle value, difficult and expensive to dispose
•UV light damage over time
•Inferior connection strength
•Can be damaged by mowing or trimming
•Limited height, not suitable for high mast
Advantage
Disadvantage
Concrete Pole
High rigidity, never needs painting
•Heavy and expensive shipping costs
•Difficult to install, requires expensive lifting equipment
•No recycle value
•Hard to repair once cracked
Aluminum Pole
-Lightweight, easier and cheaper installation
-Natural oxide film gives basic corrosion resistance
-Never needs painting
•Material cost much higher than steel
•Lower strength and stiffness, not suitable for tall poles and high mast
•Lower scrap recovery value than steel