Opens in a new tab

This is the news subsidiary site of [Morelux]. Official main site: https://www.morelux-pole.com/

Why Steel

The Capabilities Of Morelux Pole Factory

Why STEEL Pole?

Steel is the most widely used material for light poles in the world.

Because of its strength and cost advantage, steel light poles are widely applied in roadways, parking lots, industrial areas and sports lighting.

High strength: steel shafts carry high wind load and support tall poles and high mast designs.

Hot-dip galvanized, then powder coated in any RAL colour for double protection against corrosion.

Easy to fabricate by cutting, bending and welding, so tapered, octagonal, conical and custom shaft shapes are all available.

Lower material cost than aluminium, a better choice for projects with large pole quantities.

Fully recyclable, steel is a green material for sustainable lighting projects..

Single-piece steel shafts up to 14 m, sized to the wind load of your site.

Contact Us

HIGH STRENGTH

High strength steel shafts carry heavy wind load on roadways and open areas.

Tapered, octagonal and conical steel light poles with high rigidity.

Single-piece steel shafts up to 14 m for roadway and area lighting.

Steel poles resist harsh weather, from storm wind to snow and ice load.

Lower material cost than aluminium, a better choice for large pole quantities.

Safety

Hot-dip galvanized steel shafts resist rust and corrosion through years of outdoor service.

Ductile steel bends instead of shattering on vehicle impact.

Reliable earthing design lowers electric leakage risk.

Every batch tested: tensile, yield strength, coating thickness and adhesion checks.

Stable structure: heavy base and anchor bolts hold the shaft steady in high wind.

Environmentally Friendly

Steel is 100% recyclable and can be recycled again and again without losing strength.

Steel is one of the most recycled materials in the world.

Long service life means fewer replacements and less waste.

Powder coating is solvent-free and releases no VOC into the air.

Recycling steel scrap saves raw materials and production energy.

GALVANIZED CORROSION PROTECTION

Hot-dip galvanizing protects steel light poles against rust and corrosion.

The zinc coating bonds metallurgically with the steel shaft.

The zinc layer blocks moisture and oxygen from reaching the steel surface.

Performs reliably in coastal, industrial and humid areas.

Double protection of zinc coating and powder coat delivers long-term savings.

STEEL Pole Compair With Other Poles

Advantages

Disadvantages

Steel Pole

-High strength steel shafts carry heavy wind load, suitable for tall poles and high mast lighting
-Lower material cost than aluminium and fibreglass

-Hot-dip galvanized and powder coated for long-term corrosion protection

-Easy to fabricate into tapered, octagonal, conical and custom shaft shapes

-100% recyclable with real scrap value

• About three times heavier than aluminium, so shipping and installation cost more
• Bare steel rusts without protection, so galvanizing and coating are required

Fibreglass Pole

-Lightweight, easy transport and installation
-Corrosion resistant, maintenance free

•No recycle value, difficult and expensive to dispose

•UV light damage over time

•Inferior connection strength

•Can be damaged by mowing or trimming

•Limited height, not suitable for high mast

Advantage

Disadvantage

Concrete Pole

High rigidity, never needs painting

•Heavy and expensive shipping costs

•Difficult to install, requires expensive lifting equipment

•No recycle value

•Hard to repair once cracked

Aluminum Pole

-Lightweight, easier and cheaper installation

-Natural oxide film gives basic corrosion resistance

-Never needs painting

•Material cost much higher than steel

•Lower strength and stiffness, not suitable for tall poles and high mast

•Lower scrap recovery value than steel

Fast & Thorough Response

Receive detailed quotes within 24 hours, along with different product configuration options and clear production timelines.

Transparent Pricing

Btain comprehensive cost breakdowns covering product components, manufacturing processes, any additional custom finishing, and shipping costs.

Global Standards

Our manufacturing facility adheres to international quality standards. This ensures that every piece of Streetlight Poles Manufacturing we produce meets consistent premium quality levels.

Looking forward to your contact with us

Let's have a chat

🇺🇸 English ▼

Select Language

🇺🇸 English
🇿🇦 Afrikaans
🇦🇱 Albanian
🇪🇹 Amharic
🇸🇦 Arabic
🇦🇲 Armenian
🇮🇳 Assamese
🇧🇴 Aymara
🇦🇿 Azerbaijani
🇲🇱 Bambara
🇪🇸 Basque
🇧🇾 Belarusian
🇧🇩 Bengali
🇮🇳 Bhojpuri
🇧🇦 Bosnian
🇧🇬 Bulgarian
🇪🇸 Catalan
🇵🇭 Cebuano
🇨🇳 Chinese Traditional
🇫🇷 Corsican
🇭🇷 Croatian
🇨🇿 Czech
🇩🇰 Danish
🇲🇻 Dhivehi
🇮🇳 Dogri
🇳🇱 Dutch
🌐 Esperanto
🇪🇪 Estonian
🇬🇭 Ewe
🇵🇭 Filipino
🇫🇮 Finnish
🇫🇷 French
🇳🇱 Frisian
🇪🇸 Galician
🇬🇪 Georgian
🇩🇪 German
🇬🇷 Greek
🇮🇳 Gujarati
🇭🇹 Haitian Creole
🇳🇬 Hausa
🇺🇸 Hawaiian
🇮🇱 Hebrew
🇮🇳 Hindi
🇨🇳 Hmong
🇭🇺 Hungarian
🇮🇸 Icelandic
🇳🇬 Igbo
🇮🇩 Indonesian
🇮🇪 Irish
🇮🇹 Italian
🇯🇵 Japanese
🇰🇿 Kazakh
🇰🇭 Khmer
🇷🇼 Kinyarwanda
🇰🇷 Korean
🇸🇱 Krio
🇮🇶 Kurdish
🇮🇶 Kurdish Sorani
🇱🇦 Lao
🇻🇦 Latin
🇱🇻 Latvian
🇱🇹 Lithuanian
🇺🇬 Luganda
🇱🇺 Luxembourgish
🇲🇰 Macedonian
🇲🇾 Malay
🇲🇹 Maltese
🇳🇿 Maori
🇮🇳 Marathi
🇲🇲 Myanmar
🇳🇵 Nepali
🇳🇴 Norwegian
🇲🇼 Nyanja
🇮🇳 Odia
🇪🇹 Oromo
🇦🇫 Pashto
🇮🇷 Persian
🇵🇱 Polish
🇵🇹 Portuguese
🇵🇪 Quechua
🇷🇴 Romanian
🇷🇺 Russian
🇼🇸 Samoan
🇬🇧 Scots Gaelic
🇿🇼 Shona
🇪🇸 Spanish
🇸🇪 Swedish
🇮🇳 Tamil
🇹🇭 Thai
🇿🇦 Tsonga
🇹🇷 Turkish
🇹🇲 Turkmen
🇺🇦 Ukrainian
🇵🇰 Urdu
🇨🇳 Uyghur
🇺🇿 Uzbek
🇻🇳 Vietnamese
🇿🇦 Xhosa
🇮🇱 Yiddish
🇳🇬 Yoruba
🇿🇦 Zulu
No languages found